Lantronix 1-T2 User Manual

Using the MSS

Interactive Connections

These eleven commands display information about the current conÞguration 
and operating status of the MSS. The following sections describe what a user 
will see when typing the Show commands in interactive (local) mode. 

This command shows the current contents of the host table used for multihost 
mode connections. Host entries are numbered from 1 to 8.

This command shows the current TCP/IP security table, if one exists. 
Addresses or ranges of addresses are listed according to the kind of 
restrictions placed upon them.

All necessary information related to IPX/SPX connections can be viewed 
including the name of the NetWare loadserver and the number of frames 
transmitted. SpeciÞcally, a user can Þnd out which frame types are enabled, if 
internal routing is enabled, and what internal network number governs 
internal routing.

This command shows the LAT or SPX nodes that the MSS can see. For LAT, 
the name of each service node is listed along with its identiÞcation string and 
availability. For SPX, node information includes each nodeÕs socket number, 
hop count, frame type, and status.

This command displays the conÞguration and connection status of the serial 
port. Settings such as ßow control, baud rate, parity, and default hosts are 
shown. In addition, users can view the status of DSR and DTR serial signals, 
port access type, and login status. Errors are summarized, although in less 
detail than those shown by the Show Server Counters command.

This command displays MSS identiÞcation and boot procedure information. 
The Þrst lines display the MSS version, hardware address, network name and 
node number, identiÞcation string, and how long the MSS has been running. 
Software and ROM versions, conÞgured loadhosts, and startup Þles are also 
displayed.