Dexlan 050862 User Manual

“Pan Control” 
Choose from “Normal” or “Reverse”. This is to set the mirror function of the 
camera and fix the image the way the user desires each time the user logs on to 
view. 
 
“Tilt Control” 
Choose from “Normal” or “Reverse”. This is to set the image to its right side up. 
Similar to the “Pan Control” function. 
 
Click “Apply” to save changes.    Otherwise, all changes will be lost. 

 

This option determines the IP Camera Network settings. 

 

These items were all setup earlier in Setup Wizard.    Enter new addresses and 
click “Apply” to change. 

 

Fig.19.  IP Camera IP Address Settings 

“IP Address” 
This item determines IP Camera IP Address. 
 
“Subnet Mask” 
This item sets IP Camera Subnet Mask. The value is normally 255.255.255.0 
 
“Gateway” 
This item is to set IP Camera Gateway. 
 
“Obtain an IP address” 
This allows the user to choose either to set IP Camera IP Address manually or 
via DHCP.    IP Camera will reboot after the above settings have been changed. 
 

 

Fig.20.  IP Camera IP DNS Server IP 

“Primary DNS Server IP” 
This item sets IP Camera primary DNS Server IP address. 
 
“Secondary DNS Server IP”