Xerox 255 Leaflet

Page 2

Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card
Xerox Document Centre 240/255/265 LP/ST

next section of this procedure called 

Verify that the 

NetBEUI protocol is loaded 

(ALL Windows 3.11 or greater versions).

Use the 

CD-ROM (CD-ROM 2) to install print 
drivers on a Windows-based workstation. 
Details for this are found in the document 
supplied with your printer entitled 

Started with Print and Fax Services.

On the Configuration Report review the 
NetBIOS: area and note the Workgroup, 
Host Name, and Printer Name.

•

Open the 

Control Panel and double-click 

the 

Printers icon.

•

Select the printer driver you just installed 
and click 

Connect. 

•

Select an available port and click 

Network.

•

Double-click the name of the WorkGroup for 
the printer.

•

Double-click the Host Name of the printer.

•

Click once on the Printer Name then click 
OK.

•

Click the 

Start button and select Settings. 

•

From the cascade menu select 

Printers.

•

Select a printer with the right mouse button. 

•

Select the 

Properties entry in the cascade 

menu. 

•

Select the 

Details tab on the Properties 

dialog.

•

Click the 

Add Port button and browse to the 

Workgroup.

•

Double-click the name of the WorkGroup for 
the printer as shown on the 

Report.

•

Double-click the Host Name of the printer as 
shown on the 

Configuration Report.

•

Click once on the Printer Name then click 
OK.

Open an application and print a test page 
to verify operation.

If your print job does not print, refer to the 
Troubleshooting section of the 

Installation and Troubleshooting Guide 
to solve the problem.

OPTIONAL STEP: Press the 

Description button, using the Touch 
Screen keys, enter the desired text for 
this item then press 

Save.

Press the 

Connections button.

Set Maximum Connections and Timeout

Touch the 

Maximum Connections 

soft button on the touch screen and on 
the keypad enter the desired 
maximum connection number 
between 1 and 30. It is recommended 
that this value should be set at the 
default.

Touch the 

Connection Timeout soft 

button on the Touch Screen. On the 
keypad enter the desired number of 
second between 0 and 9999. Press 
Save to exit the Connections Screen.

Press the 

Exit Tools button. 

Wait a MINIMUM of 7 minutes for the 
printer to reset.

Obtain a 

Configuration Report from the 

printer to use in the remainder of the 
installation.

From the documentation package supplied 
with your printer, retrieve the 

Network Services CD-ROM and the 
document entitled 

Print and Fax Services. Proceed to the