IBM 100/10 User Manual

The PCM-9575 is equipped with a high performance 32-bit Ethernet 
chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD 
standards. It is supported by major network operating systems. It is also 
both 100Base-T and 10Base-T compatible. The medium type can be con-
figured via the RSET8139.exe program included on the utility disk. 
The Ethernet port provides a standard RJ-45 jack via an optional wiring 
kit. The network boot feature can be utilized by incorporating the boot 
ROM image files for the appropriate network operating system. The boot 
ROM BIOS files are combined with system BIOS, which can be enabled/
disabled in the BIOS setup. 

Before installing the Ethernet driver, note the procedures below. You 
must know which operating system you are using in your PCM-9575 
Series, and then refer to the corresponding installation flow chart. Then 
just follow the steps described in the flow chart. You will quickly and 
successfully complete the installation, even if you are not familiar with 
instructions for MS-DOS or Windows.

If you want to set up your Ethernet connection under the MS-DOS or 
Windows 3.1 environment, you should first check your server system 
model. For example, MS-NT, IBM-LAN server, and so on.
Then choose the correct driver to install in your biscuit PC.
The installation procedures for various servers can be found on the sup-
plied CD-ROM, the correct path being: 

D:\Biscuit\9575\LAN\8139C\wfw311