Raritan Computer P2-USTIP1 User Manual
C
HAPTER
3:
O
PERATION
–
A
DMINISTRATIVE
F
UNCTIONS
21
Performance Settings
Select [P] Performance Settings on the Configuration Menu to set up USTIP’s video data
transfer and bandwidth parameters.
transfer and bandwidth parameters.
Figure 17 USTIP Performance Settings Screen
• Pause video stream for idle users: Pausing the flow of video data during periods of
prolonged inactivity will prevent an inactive user from needlessly consuming bandwidth.
− Never (default): Video data will continually be sent to Remote PC, constantly updating
− Never (default): Video data will continually be sent to Remote PC, constantly updating
the screen, even if the remote user is Idle, sending no active input to USTIP.
− After 5, 15, 30, 60, or 120 minutes: Video data flow to the Remote PC will pause after
the selected time period has passed with no active input from the Remote PC.
• Maximum total Bandwidth usage: Sets an upper limit to the amount of bandwidth that can
be consumed by this one USTIP unit.
− No Limit (default): USTIP can consume as much bandwidth as needed.
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Total bandwidth available to be
− No Limit (default): USTIP can consume as much bandwidth as needed.
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Total bandwidth available to be
consumed by this USTIP unit is limited to the selected quantity. The lower the
bandwidth allowed, the slower the performance that may result.
bandwidth allowed, the slower the performance that may result.
• Maximum Bandwidth per user: Sets an upper limit to the amount of bandwidth that can be
consumed by each user logged onto this one USTIP unit.
Note: Control of USTIP and a connected Target Server is based on first active keyboard/mouse
input, so multiple users attempting keyboard input or mouse movement at exactly the same
moment may experience uneven control.
input, so multiple users attempting keyboard input or mouse movement at exactly the same
moment may experience uneven control.
− No Limit (default): Each active user can consume as much bandwidth as needed.
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Bandwidth consumed by each active
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Bandwidth consumed by each active
user during the operation of this USTIP unit is limited to the selected quantity. The
lower the bandwidth allowed, the slower the performance that may result.
lower the bandwidth allowed, the slower the performance that may result.
Press CTRL+S to save changes or Esc to cancel changes, and return to Configuration Menu.
Saved Performance Settings changes will not take effect until USTIP is restarted.
Saved Performance Settings changes will not take effect until USTIP is restarted.