Digicom 3911 User Manual

September 1998

3910-A2-GN32-40

The Options Status function displays all optional firmware features currently installed in the
modem. If no firmware options are installed, None_Installed appears on the LCD.

To access Options from the Status branch, make the following sections:

F1

Status:
DTE

Options

F2

F3

Press the  

  key until Options appears. Select Options.

F1

Options:Status

>

V.29

V.33

F2

F3

If optional features are installed in the modem, they appear on the LCD’s bottom line. If other
features are installed, press the  

  key to scroll other features into view.

To exit this function and remain in the Status branch, press the  

  key. To exit and return to the

Top-Level menu, press the  

  key.

Record is a troubleshooting tool used by the end user in conjunction with support personnel. This
function allows the end user to retrieve and report any sequence faults to support personnel. A
sequence fault is an irregular or unexpected event.

There are two selections under Record: Display and Clear. Display allows up to eight sequence
fault messages that have been recorded by the modem to be displayed on the LCD. If no
sequence faults have occurred, then Modem O.K. appears.

Clear is used to remove all sequence fault messages from nonvolatile memory and the LCD.

To access Record from the Status branch, make the following selections:

F1

Status:

<

Options

Record

F2

F3