Epson Epson User Manual

Note

If you use ECP mode (Extended Capabilities Port), check

your parallel device software documentation for the correct

DMA channel (DRQ) setting. Then set jumpers JP8 and JP18

to match this setting if necessary. See “Changing the Jumper

Settings” in Chapter 4 for more information.

If you have a printer, a modem, or other device with a serial
interface, you can connect it to one of the serial (RS-232C) ports.
Make sure you have a cable compatible with a DB-9P connector.

To connect a serial device, insert the connector into
either of the two serial ports, which are marked with

the icons shown at the left. If you are connecting only

one serial device, use the serial 1 port.

Follow these steps to connect the computer’s power cord:

1.

Plug the power cord into the power inlet on the back of the
computer. Note that the position of the power inlet and AC
outlet on your computer may be reversed.