Toshiba e-STUDIO20 User Manual
9
1
2
3
4
5
6
7
9
10
11
12
8
2. General Precautions
1
Handle and use the machine gently and carefully.
• Do not place anything on the paper cassettes or original feed tray.
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an
accident or electrical trouble might occur.
• Do not allow any metal items such as paper clips to fall into the copier.
3
It is recommended that only supplies made or designated by Toshiba be used for the
e-STUDIO16/20/25 in order to optimize copy quality. All supplies should be stored in a
cool, dry area.
For optimum performance, it is recommended that high quality 80 g/m
2
. Xerographic bond paper be
used.
Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
premature servicing.
2
Be sure to turn OFF the power switch (unless using auto timer mode):
• When you leave your office at night.
• If a power failure occurs.
Caution
When turning OFF the power switch, be sure to do so only after the machine cycling has
come to a complete stop.
Be sure to disconnect the power-cord plug:
• When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
• If an unusual noise is heard from the copier.
• If the outside of the copier becomes unusually hot.
• If any part of the copier is damaged, or it has been dropped.
• If the copier has been exposed to rain or liquid.
Warning label
Identification label