Nortel Networks 8683POS User Manual
104
Chapter 6 Command line interface
209564-A
show ports stats pos activealarms
This command displays active alarms on the Passport 8683POS Module port. The
command uses the syntax:
command uses the syntax:
show ports stats pos activealarms
[
<ports>
]
shows output for the show ports stats pos activealarms
command.
MRU
Size (in octets) of the largest packet that can be sent or
received on the interface. For IPCP and IPXCP, the
maximum is 1936. When BCP is enabled, however, the
maximum is 1934. Check which NCP is enabled before
configuring the Mru.
received on the interface. For IPCP and IPXCP, the
maximum is 1936. When BCP is enabled, however, the
maximum is 1934. Check which NCP is enabled before
configuring the Mru.
Note: The Bridge Control Protocol (BCP) is enabled on the
Passport 8683POS Module by default.
Passport 8683POS Module by default.
FCS SIZE
Sets the length of the redundancy check (fcs) to either 32
or 16.
or 16.
IPX ROUTE PROTOCOL
Sets the protocol for IPX routing.
LQR-QUAL THRESHOLD
Indicates the link quality reporting threshold.
LQR-QUAL PERIOD
Indicates the link quality reporting interval.
REMOTE IP
Indicates the remote iP address.
IPX NET ADDR
Indicates the IPX net address.
STATUS OPERATE
Operational status.
LCP STATUS
Link Control Protocol status.
BRIDGE STATUS
Bridging status.
IP STATUS
Routing (IP) status.
IPX STATUS
Routing (IPX) status
PPP LQSTATUS
Point-to-Point status
Table 36 Information fields for output of the show ports info pos all
command (continued)
command (continued)
Field Description