Nortel Networks 8683POS User Manual
98
Chapter 6 Command line interface
209564-A
describes the parameters and variables for the config pos stg
command.
Table 35 config pos stg command parameters and variables
config pos info command
The config pos info command shows the current state of the port.
shows a sample of the output from the
config
pos
info
command.
Figure 33 config pos info command sample output
Parameters and variables
Description
faststart <enable | disable>
Enables or disables the fast start flag.
info
Shows the last saved port settings and the next-level CLI commands.
Note that this does not show the current settings, but the last saved
settings.
Note that this does not show the current settings, but the last saved
settings.
pathcost <intval>
Sets the contribution of this port to the path cost.
priority <intval>
Sets the priority of this port.
stg <enable | disable>
Enables or disables spanning tree protocol.
Passport-8610:5/config# pos 10/5 info
Port 10/5 :
lock : false
name :
unknown-mac-discard : disable
default-vlan-id : 1
perform-tagging : disable
tagged-frames-discard : disable
untagged-frames-discard : disable
state : up
linktrap : enable
port-type : OC3-MMF
Passport-8610:5/config#