NEC 128/384 User Manual
NDA-24230 Issue 2.0
Page 4-13
VisuaLink 128/384 User Guide
Chapter 4
4.2.5 VisuaLink System Procedures
The following are the steps and procedures for the installation of the VisuaLink 128
or VisuaLink 384.
or VisuaLink 384.
STEP
ACTION
DRAWING
1.
Locate and unpack the Cabinet box.
2.
Locate Power Strip at botton-left (looking through
the front) of cabinet and feed power cable through
the power opening at rear of cabinet.
the front) of cabinet and feed power cable through
the power opening at rear of cabinet.
3.
Plug power strip power cable into AC outlet.
Make sure the ON/OFF switch on the upper right
outside of the cabinet is in the OFF position.
Note: The power switch will be lite when in the
Make sure the ON/OFF switch on the upper right
outside of the cabinet is in the OFF position.
Note: The power switch will be lite when in the
ON position.
Powerstrip
Power Switch