Nortel Networks 1750 User Manual
Chapter 3 Option card and DIMM installation 55
Nortel VPN Router Installation — VPN Router 1750
Installing and replacing an option card
Before you install or replace an interface card or Hardware Accelerator card,
complete the following procedures:
complete the following procedures:
•
.
•
Remove the front bezel from the chassis, and then remove the chassis from the
equipment rack. For more information, see
equipment rack. For more information, see
.
•
Remove the top cover from the chassis. For more information, see
•
Attach the antistatic wrist strap that ships with the VPN Router 1750. For
more information, see
more information, see
To install or replace an interface card or a Hardware Accelerator card:
1
Locate the slot where you plan to install the new or replacement option card.
Warning: Risk of electric shock
Turn off the VPN Router 1750 and unplug it before you attempt to install
an option card.
Turn off the VPN Router 1750 and unplug it before you attempt to install
an option card.
Note: Do not try to install an HSSI WAN interface card or a Hardware
Accelerator card in slot 4.
Accelerator card in slot 4.