Star Micronics IFBD-HW03/04 User Manual

 

IFBD-HW03/04 Product Specifications Rev. 0.00 

 

3.5.3.  Self-Diagnosis Function Specifications   

This product can print the results of a self-diagnosis and contents of the internal settings.     

A self-diagnosis print is performed after a test print of the printer when the printer is started.     

Example Self-diagnosis Print

 

01234567890123456789012345678901234567890 
+---------------+---------------+---------------+---------------+ 
Star Micronics IFBD-HW03/04 Ver 1.0.0 
Copyright (C) 2004 STAR MICRONICS CO., 
LTD. 
Copyright (C) 2004 silex technology, I 
nc. 
 
*** Diagnostic report *** 
      ROM Check   

: Ok 

      ROM stat   

: xxxx FFFF 0000 0000 

      NIC Check   

: Ok 

   NIC Addr 

: 00:80:92:12:34:56 

EEPROM Check   

: Ok 

EEPROM Check   

: xxxx xxxx 0000 0000 

 
Wireless LAN status    : AP Connected 
  Current SSID 

: STAR-WIFI 

  Current BSSID 

: xx:xx:xx:xx:xx:xx 

  Current Channel   : 5 (1-14) 
  Region  Code      : 42 
 
*** Configuration report ***           
    [Web Page Refresh Interval(sec.)]  
                :10                                                       
<< Configure General >>                
    [Change root Password]             
                :""                                                       
        [NIC Reset Control]                               
                :ENABLE                                               
<< Configure WiFi – .11b >> 
    [Wireless Mode]                    
                :Infra.                                               
        [SSID]                                                         
                :"STAR-WIFI"                                     
    [Channel]                          
                :11                                                       
        [Use WEP]                                                   
        :None                          
        [WEP Key]                                                   
                :""                                                       
<< Configure TCP/IP >>                 
    [DHCP/BOOTP]                       
                :ENABLE                                               
        [RARP]                                                         
                :ENABLE                                               
    [IP Address]                                             
                :0.0.0.0                                             
    [Subnet Mask]                      
                :0.0.0.0                                             
        [Default Gateway]                                   
                :0.0.0.0                                             
        [Universal PnP]                                       
        :DISABLE                       
    [9100 Multi Session]               
                :ENABLE                                               
<< Configure TCP/IP - DNS >>           
        [Primary Server]                                     
                :0.0.0.0                                             
    [Secondary Server]                 
                :0.0.0.0                                             
<< Configure TCP/IP - POP >>           
        [POP Protocol]                                         
        :DISABLE                       
<< Configure TCP/IP - SMTP >>          
    [SMTP Protocol]                                       

 

3-33