Compaq NX7000 User Manual
2–6
Maintenance and Service Guide
Troubleshooting
Device Options
(continued)
■
Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional EPP, or
Enhanced Capabilities Port (ECP).
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional EPP, or
Enhanced Capabilities Port (ECP).
■
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
NTSC-J, or PAL-M.*
■
Enable/disable all settings in the
SpeedStep
window. (When Disable is
selected, the notebook runs in Battery
Optimized mode.)
Optimized mode.)
■
Specify how the notebook recognizes
multiple identical port replicators that are
identically equipped. Select Disable to
recognize the port replicators as a single port
replicator; select Enable to recognize the port
replicators individually, by serial number.
multiple identical port replicators that are
identically equipped. Select Disable to
recognize the port replicators as a single port
replicator; select Enable to recognize the port
replicators individually, by serial number.
■
Enable/disable the reporting of the processor
serial number by the processor to the
software.
serial number by the processor to the
software.
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
Table 2-3
Advanced Menu
(Continued)
Select
To Do This
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM