Brainboxes BL-819 User Manual
4.2.2. Main Menu
Sending the “Enter” character to the adapter
accesses its main menu. This is also sometimes
referred to as “Carriage Return”.
All basic configuration options for adapter are
accessed via this menu. Advanced features are not
available from the menu interface.
Users wishing to alter “advanced” settings can do so
by either using the Windows Configuration
application documented above, or by using the
commands documented below.
accesses its main menu. This is also sometimes
referred to as “Carriage Return”.
All basic configuration options for adapter are
accessed via this menu. Advanced features are not
available from the menu interface.
Users wishing to alter “advanced” settings can do so
by either using the Windows Configuration
application documented above, or by using the
commands documented below.
4.2.3. Communications Parameters
Selecting option 1 from the “Main Menu” menu
displays the Communications settings menu.
It is from this menu that all available serial port
settings can be changed. The available options
are detailed below.
The factory set communications parameters for
your adapter are as follows…
Baud Rate:
displays the Communications settings menu.
It is from this menu that all available serial port
settings can be changed. The available options
are detailed below.
The factory set communications parameters for
your adapter are as follows…
Baud Rate:
115,200
Data Bits:
8 (non-configurable)
Parity:
None
Stop Bits:
1
You can alter these settings by using the
configuration menu options shown below.
The user is first prompted to change the Baud
Rate. The current setting is shown. To change the
baud rate, just type the rate you want to use and
press <enter>. The Adapter will accept any
number you type, but will set the baud rate to the
one that’s closest to what it can actually achieve.
Press “Esc” to skip this setting – the current
setting will remain unchanged
Rate. The current setting is shown. To change the
baud rate, just type the rate you want to use and
press <enter>. The Adapter will accept any
number you type, but will set the baud rate to the
one that’s closest to what it can actually achieve.
Press “Esc” to skip this setting – the current
setting will remain unchanged
Manual for BL-819 / 830
© Copyright Brainboxes Limited 2005
Page 22 of 41