Motorola IH5 User Manual
Block Diagram
http://www.motorola.com/computer/literature
6-23
6
TMCPN710 Transition Module
The TMCPN710 transition module is used in conjunction with all models
of the MCPN750A base board. The transition module provides additional
I/O capabilities for the board.
of the MCPN750A base board. The transition module provides additional
I/O capabilities for the board.
The features of the TMCPN710 include:
❏
Two EIA-232-D asynchronous serial ports (identified
as
COM1
and
COM2
on the front panel)
❏
Two USB Series A connectors for USB interface
❏
One 10BaseT/100BaseTx connector for ethernet connections
(optional)
(optional)
❏
Two 50-pin on-board connectors for EIDE interface to one or two
Compact FLASH plug-in modules
Compact FLASH plug-in modules
❏
Two 68-pin .08 Series Subminiature D connectors for PMC I/O
For additional information about the serial interface modules, refer to the
TMCPN710 Transition Module Installation and Use manual (listed in the
Related Documentation appendix).
TMCPN710 Transition Module Installation and Use manual (listed in the
Related Documentation appendix).
TM-PIMC-0001
The TM-PIMC-0001 transition module is used in conjunction with all
models of the MCPN750A base board. The transition module provides
additional I/O for the MCPN750A series of SBCs. This transition module
also functions as a PMC Interface Module (PIM) carrier, supporting the
flexible PIM scheme for PMC rear I/O. Two PIM sites are provided that
interface with each of the PMC sites on the MCPN750A.
models of the MCPN750A base board. The transition module provides
additional I/O for the MCPN750A series of SBCs. This transition module
also functions as a PMC Interface Module (PIM) carrier, supporting the
flexible PIM scheme for PMC rear I/O. Two PIM sites are provided that
interface with each of the PMC sites on the MCPN750A.
The features of the TM-PIMC-0001 include:
❏
Two RJ-45 connectors for asynchronous serial ports (identified as
COM1 and COM2 on the front panel)
COM1 and COM2 on the front panel)
❏
Two 10-pin headers (identified as COM3 and COM4)
❏
One RJ-45 connector for 10BaseT/100BaseTx ethernet connection