Motorola IH5 User Manual
TMCPN710 Transition Module
http://www.motorola.com/computer/literature
7-23
7
TMCPN710 Transition Module USB Connectors (J10, J12)
Two USB Series A receptacles are located at the rear panel of the
TMCPN710 Transition Module. The pin assignments for these connectors
are as follows:
TMCPN710 Transition Module. The pin assignments for these connectors
are as follows:
TMCPN710 Transition Module IDE CompactFLASH Connectors
(J15, J16)
(J15, J16)
Two 50-pin CompactFLASH card header connectors located on the
TMCPN710 Transition Module provide the EIDE interface to one or two
CompactFLASH plug-in modules. The CompactFLASH interface is
connected to the Primary IDE channel. Connector J15 is configured as the
Master EIDE interface while J16 is configured as the Slave EIDE
interface. The pin assignments for these connectors are as follows:
TMCPN710 Transition Module provide the EIDE interface to one or two
CompactFLASH plug-in modules. The CompactFLASH interface is
connected to the Primary IDE channel. Connector J15 is configured as the
Master EIDE interface while J16 is configured as the Slave EIDE
interface. The pin assignments for these connectors are as follows:
Table 7-14. TMCPN710 USB 0 Connector (J10)
1
USBVOUT0
2
USB0DATA_N
3
USB0DATA_P
4
GND
Table 7-15. TMCPN710 USB 1 Connector (J12)
1
USBVOUT1
2
USB1DATA_N
3
USB1DATA_P
4
GND