Compaq EV67 User Manual
4–24
Cache and External Interfaces
Alpha 21264/EV67 Hardware Reference Manual
System Port
Systems that require an explicit indication of ChangeToDirty status changes initi-
ated by STx_C instructions can assert Cbox CSR STC_ENABLE[0]. When this
register field = 000, CleanToDirty and SharedToDirty commands are used. The dis-
tinction between a ChangeToDirty command generated by a STx_C instruction and
one generated by a STx instruction is important to systems that want to service
ChangeToDirty commands with dirty data from a source processor. In this case, the
distinction between a locked exclusive instruction and a normal instruction is criti-
cal to avoid livelock for a LDx_L/STx_C sequence.
ated by STx_C instructions can assert Cbox CSR STC_ENABLE[0]. When this
register field = 000, CleanToDirty and SharedToDirty commands are used. The dis-
tinction between a ChangeToDirty command generated by a STx_C instruction and
one generated by a STx instruction is important to systems that want to service
ChangeToDirty commands with dirty data from a source processor. In this case, the
distinction between a locked exclusive instruction and a normal instruction is criti-
cal to avoid livelock for a LDx_L/STx_C sequence.
4.7.5 ProbeResponse Commands (Command[4:0] = 00001)
The 21264/EV67 responds to system probes that did not miss with a 4-cycle transfer on
SysAddOut_L[14:0]. As shown in Table 4–14, the Command[4:0] field for a ProbeRe-
sponse command equals 00001. Table 4–17 shows the format of the 21264/EV67 Prob-
eResponse command.
SysAddOut_L[14:0]. As shown in Table 4–14, the Command[4:0] field for a ProbeRe-
sponse command equals 00001. Table 4–17 shows the format of the 21264/EV67 Prob-
eResponse command.
Table 4–16 Programming SET_DIRTY_ENABLE[2:0]
SET_DIRTY_ENABLE
[2,0] (DS,CS,C)
[2,0] (DS,CS,C)
Cbox Action
000
Everything acknowledged internally (uniprocessor).
001
Only clean blocks generate external acknowledge (CleanToDirty commands only).
010
Only clean/shared blocks generate external acknowledge (SharedToDirty command
only).
only).
011
Clean and clean/shared blocks generate external acknowledge.
100
Only dirty/shared blocks generate external acknowledge (SharedToDirty commands
only).
only).
101
Only dirty/shared and clean blocks generate external acknowledge.
110
Only dirty/shared and clean/shared blocks generate external acknowledge.
111
All transactions generate external acknowledge.
Table 4–17 21264/EV67 ProbeResponse Command
SysAddOut_L[14:2]
SysAddOut_L[1] SysAddOut_L[0]
Cycle 1
0
00001
Status[1:0]
DM
VS
VDB
[2:0]
[2:0]
X
X
Cycle 2
0
MS
MAF
[2:0]
[2:0]
X
X
Cycle 3
0
X
X
X
Cycle 4
X
X
X