Toshiba GD-1250 User Manual
2.SENDING/RECEIVING A FAX
Sending a Fax 25
2 SENDING/RECEIVING A FAX
Placing the original(s) on the RADF
This section describes how to set the original(s) on the RADF (Reversing Automatic Document Feeder, optional). When
the originals are placed on the RADF, the uppermost page is the first to be scanned and sent.
the originals are placed on the RADF, the uppermost page is the first to be scanned and sent.
The RADF is an optional unit for the e-STUDIO4520C Series / e-STUDIO455 Series. It is equipped with the
e-STUDIO6530C Series / e-STUDIO855 Series as a standard.
e-STUDIO6530C Series / e-STUDIO855 Series as a standard.
1
After aligning the originals, place them with their face up and slide the guides to rest
against the edges of the originals.
against the edges of the originals.
y
Regardless of their sizes, originals are acceptable up to 100 sheets (35 to 80 g/m
2
(9.3 to 20 lb.)) or 16 mm
(0.62") in height.
y
y
When an original of any size other than LT/A4 is placed in the direction shown in the above left figure,
transmission to a recipient is carried out so that the pre-entered sender information is printed in position A in the
figure.
transmission to a recipient is carried out so that the pre-entered sender information is printed in position A in the
figure.
y
When an original of LT/A4 size is placed in the direction shown in the above right figure, transmission to a
recipient is carried out so that the pre-entered sender information is printed in position B in the figure.
recipient is carried out so that the pre-entered sender information is printed in position B in the figure.
y
A
B