Toshiba Satellite A500/ Satellite Pro A500/ Satellite A500D/ Satellite Pro A500D series User Manual

User’s Manual

8-6

Optional Devices

Additional memory module

You can install additional memory into the computer in order to increase the

amount of system memory that is available. This section describes how to

install and remove optional memory modules.

Point to note about memory module error

If you install a memory module that is not compatible with the computer, the

Power indicator will flash in the following ways:

■

If there is an error in only Slot A or no memory module is inserted in Slot

A: repeatedly flashes amber twice, then green.

■

If there is an error in Slot B: repeatedly flashes amber, then green twice.

■

If there are errors in both Slot A and Slot B: repeatedly flashes amber

twice, then green twice.

In all instances you should shut down the computer and remove the

incompatible module(s).

■

You should place a mat beneath the computer in order to prevent the

computer's lid from becoming scratched or damaged when you are

installing/replacing the memory module. In this instance you should

avoid mats that are made of materials that hold or generate static

electricity.

■

When installing or removing a memory module, you must ensure that

you do not touch any other internal areas of the computer.

■

Insert the two memory modules into Slot A and Slot B respectively. The

computer will operate in dual channel mode.

You can access the inserted memory modules efficiently in dual

channel.

■

Use only memory modules approved by TOSHIBA.

■

Do not try to install or remove a memory module under the following

conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode.
c. Wake-up on LAN is enabled.
d. The wireless communication switch is turned on.

■

Be careful not to let screws or other foreign matter fall into the

computer. It could cause malfunction or electric shock.

■

Additional memory module is a precision electronic component that

may be fatally damaged by static electricity. Since the human body can

carry static electricity, it is important that you discharge yourself before

touching or installing any additional memory modules. To discharge

your body’s static electricity, simply touch any metal close to you with

bare hands.

■

In order to ensure that the computer power is not turned on while

working, set the Wireless communication switch to OFF.