Panasonic CM0610MJ0-CD User Manual
7. Fax
40
7.3 Broadcast transmission
You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
navigator directory (page 36).
Manual broadcast: Store items using one-touch dial or
navigator directory (page 36). You can also use the dial
keypad to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
navigator directory (page 36).
Manual broadcast: Store items using one-touch dial or
navigator directory (page 36). You can also use the dial
keypad to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
L
The broadcast function utilizes stations 1–3. The
one-touch dial function will be canceled.
one-touch dial function will be canceled.
L
Make sure that the {Fax} light is ON.
7.3.1 Programming items into the
broadcast memory
broadcast memory
1
Press {Menu} repeatedly to display “
DIRECTORY
SET”.
2
Select the desired broadcast key.
For BROADCAST 1–2:
1. {Broadcast}
2. Press {V} or {^} repeatedly to select
“
BROADCAST”.
For MANUAL BROADCAST:
1. {Manual broad}
2. Press {V} or {^} repeatedly to select “
MANUAL
BROAD”.
3
{
Set}
4
Program items.
Using stations 1–11:
Press the desired station key.
Using stations 12–22:
Press {Lower}, then press the desired station key.
Using navigator directory:
Press {V} or {^} repeatedly to display the desired
item. i {Set}
item. i {Set}
Using the dial keypad (only for manual broad):
Enter the fax number. i {Set}
L
The number in brackets indicates the number of
registered items.
registered items.
L
To program other items, repeat this step (up to 20
items).
items).
L
If you have programmed the wrong item, press
{
{
Stop} to erase the item.
5
{
Set}
L
To program another broadcast key, repeat steps
2 to 5.
2 to 5.
6
{
Stop}
7.3.2 Adding a new item into the broadcast
memory
memory
1
{
Directory}
2
Press {V} or {^} repeatedly to display the desired
broadcast memory (“
broadcast memory (“
<BROADCAST1>”,
“
<BROADCAST2>” or “<MANUAL BROAD>”). i
{
Menu} i {*}
3
Press {V} or {^} repeatedly to display the desired
item you want to add. i {Set}
item you want to add. i {Set}
L
To add other items, repeat this step (up to 20
items).
items).
4
{
Stop}
Note:
L
When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
BROADCAST memory, you can only select stored
items.
7.3.3 Erasing a stored item from the
broadcast memory
broadcast memory
1
{
Directory}
2
Press {V} or {^} repeatedly to display the desired
broadcast memory (“
broadcast memory (“
<BROADCAST1>”,
“
<BROADCAST2>” or “<MANUAL BROAD>”). i
{
Menu} i {#}
3
Press {V} or {^} repeatedly to display the desired
item you want to erase.
item you want to erase.
L
To cancel erasing, press {Stop}.
4
{
Set} i {Set} i {Stop}
7.3.4 Sending the same document to pre-
programmed parties
programmed parties
1
Set the original (page 19).
2
If necessary, change to the desired resolution (page
38) and the desired contrast (page 38).
38) and the desired contrast (page 38).
3
Press {Broadcast} (1–2) or {Manual broad}.
Note:
L
To stop sending, see page 62.
L
If you select “
FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
send will decrease.
L
If the document exceeds the memory capacity,
sending will be canceled.
sending will be canceled.
L
If a party is busy or does not answer, it will be skipped
and redialed later 1 time.
and redialed later 1 time.
L
After transmission, the unit will automatically print a
report (broadcast sending report).
report (broadcast sending report).