Panasonic CM0610MJ0-CD User Manual
12. Help
72
For assistance, please visit http://www.panasonic.com/help
12.3.7 Using an answering machine
12.3.8 If a power failure occurs
L
The unit will not function.
L
If any documents are stored in the memory (i.e. during copy, PC printing, fax transmission or fax reception), they
will be lost.
will be lost.
L
The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
should be made for access to emergency services.
L
Fax transmission and reception will be interrupted.
L
When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
erased.
12.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows
Vista/Windows 7 users (KX-FLM671, LAN connection only)
Vista/Windows 7 users (KX-FLM671, LAN connection only)
After installing Microsoft Windows XP Service Pack 2 or later/Windows Vista/Windows 7, you will not be able to use
the following functions because the Windows Firewall feature will be activated and block the connection.
–
the following functions because the Windows Firewall feature will be activated and block the connection.
–
Device Monitor
–
LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above
functions properly.
functions properly.
1
Insert the CD-ROM that is supplied with the unit into your CD-ROM drive.
The [Windows Security Alert]
dialog box appears and asks
if I want to block
[
dialog box appears and asks
if I want to block
[
PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
–
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
–
PC printing
–
Scanning
–
Remote Control
–
PC FAX
–
Device Monitor
L
Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 72).
the data transmission for Multi-Function Station (page 72).
Problem
Cause & Solution
I cannot receive documents
automatically.
automatically.
L
Your greeting message on the answering machine is too long. Shorten the
message. Record a message up to 10 seconds long.
message. Record a message up to 10 seconds long.
L
The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
messages.
L
Check if the answering machine is turned ON and connected to the unit
properly (page 43).
properly (page 43).
L
Set the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
code to access the answering
machine remotely, but the line
was disconnected.
L
The code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
Callers complain that they
cannot send a document.
cannot send a document.
L
There is no room left in the memory of your answering machine to record
voice messages. See the operating instructions of the answering machine
and erase unnecessary messages.
voice messages. See the operating instructions of the answering machine
and erase unnecessary messages.
L
You set the answering machine to only give a greeting message.
Problem
Cause & Solution