Panasonic KX-FP85AL User Manual

See pages 46 and 47 for details.

To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate 

to select “ON”.

4. Press 

.

5. Enter the fax number.
6. Press 

.

7. Enter the transmission start time.

Press 

to select “AM” or “PM”.

8. Press 

.

9. Press 

.

●

To cancel after programming,
press 

then 

.

To change the number of rings
when the unit detects a voice call in
the TEL/FAX mode

SILENT FAX RING

3, 4, 5, 6, 7,
8, 9

69

1. Press

.

2. Rotate 

until “ADVANCED

MODE” is displayed.

Press 

and rotate 

until

the desired feature is displayed.

3. Press 

.

4. Rotate

until the desired

setting is displayed.

5. Press 

.

6. Press

.

To print the journal report
automatically for fax communications

AUTO JOURNAL

OFF

After transmission, the unit will turn
off automatically.

●

This feature is not available for
broadcast transmission.

●

The calling charge may be higher.

If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.

OVERSEAS MODE

To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.

●

The setting can be reserved to
take place up to 24 hours in
advance.

DELAYED SEND

ON

ON / 
fax no. /
hh:mm

“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 34).

●

Step 4 may be slightly different depending on the
feature.

●

See page 66 for more details.

(The default setting is in bold type.)

(continued)

“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (p. 28).

■

To print Caller ID list automatically

AUTO CALL. LIST

OFF