Philips DPM 9250 0 User Manual
40
DPM 9350/00 - User Manual
Voice-activated recording
Voice-activated recording mode is a convenient feature for hands-free dictation.
When voice-activated recording is enabled, the DPM is in Record Standby
mode; recording will start automatically when the input level exceeds a certain
threshold (i.e. usually when you start dictating). This means that recording stops
a few seconds after you stop speaking and restarts automatically when you start
speaking again.
When voice-activated recording is enabled, the DPM is in Record Standby
mode; recording will start automatically when the input level exceeds a certain
threshold (i.e. usually when you start dictating). This means that recording stops
a few seconds after you stop speaking and restarts automatically when you start
speaking again.
To operate the DPM in voice-activated recording mode, follow these steps:
1. Enable voice-activated recording in the DPM menu.
For more information, refer to the corresponding section in the DPM menu
chapter in this manual.
chapter in this manual.
2. Make sure that the 4-Position Switch is in the Stop position.
3. Press the REC button; the device is in Record Standby mode.
4. Move the 4-Position Switch to the Play position.
5. Start dictating and recording will start automatically. The symbol for voice-
activated recording is shown on the DPM display.
When you stop dictating, the DPM goes back into Record Standby after
three seconds.
three seconds.