ZyXEL Communications n/a User Manual

Chapter 20 VoIP Commands

DSL & IAD CLI Reference Guide

voice config signal minse <index> <20-

1800> 

Sets the minimum number of seconds the ZyXEL Device 
accepts for a session expiration time when it receives a 
request to start a SIP session.

voice config signal serveraddress <index> 

<ip> 

Sets the SIP server address for this SIP account.

voice config signal serverport <index> 

<1024-65535> 

Sets the SIP server’s listening port for this SIP account.

voice config signal registeraddress 

<index> <ip> 

Sets the SIP register server address for this SIP account.

voice config signal registerport <index> 

<1024-65535> 

Sets the SIP register server’s listening port for this SIP 
account.

voice config signal userid <index> 

<username> 

Sets the SIP username for this SIP account.

voice config signal password <index> 

<password> 

Sets the SIP password for this SIP account.

voice config signal urltype <index> 

<sip|tel>

Sets the SIP URL type for this SIP account.

sip

: SIP messages are sent to domain name or IP 

address.

tel

: SIP messages are sent to addresses represented 

as telephone numbers.

voice config signal port <index> <1024-

65535> 

Sets the ZyXEL Device’s SIP listening port for this SIP 
account. 

voice config signal phonenumber <index> 

<0-32> 

Sets the SIP number for this SIP account.

voice config signal domain <index> 

<domain> 

Sets the SIP service domain name.

: 1-128 alphanumeric characters.

voice config signal dtmf <index> 

<rfc2833|pcm|sipinfo|rfc2833like>

Sets the method for sending the tones created by 
pressing buttons on your phones keypad.

rfc2833

: sends DTMF tones in RTP packets.

pcm

: sends DTMF tones in voice data stream.

sipinfo

: sends DTMF tones in SIP messages.

rfc2833like

: Sends the information in SIP messages 

with an RTP payload.

voice config signal pri_compression 

<index> <0:G711mu|8:G711A|18:G729> 

Sets the primary compression (voice codec) type for this 
SIP account.

voice config signal sec_compression 

<index> <0:G711mu|8:G711A|18:G729> 

Sets the secondary compression (voice codec) type for 
this SIP account.

voice config signal portrange <index> 

<start-port> <end-port> (40000~65535) 

Sets the port range for RTP/RTCP communication.

voice config signal transport <index> 

<udp|tcp> 

Sets the protocol for sending SIP messages.

voice config signal callerid <index> 

<disable|enable>

Enables or disables the caller ID feature for this SIP 
account.

voice config signal autoredialpstn <index> 

<disable|enable> 

Enables or disables the auto-redial feature for this SIP 
account.

Table 50   SIP Account Command Summary