ZyXEL Communications n/a User Manual

Chapter 21 WAN Commands

DSL & IAD CLI Reference Guide

Use these commands to configure call scheduling on the ZyXEL Device.

The following example:

Table 64    wan callsch Commands

wan callsch action <0:force 

on|1:force down|2:enable dial-on-

demand|3:disable dial-on-demand>

Sets the type of action performed by the previously-
specified call schedule.

wan callsch active <yes|no>

Activates or deactivates the previously-specified call 
schedule.

wan callsch clear

Resets the configuration of the previously-specified 
call schedule to its default values.

wan callsch display

Displays the current configuration of the previously-
specified call schedule.

wan callsch duration <hour> <minute>

Sets the length of time the previously-specified call 
schedule should remain active.

wan callsch freeMemory 

Clears the call schedule information in the working 
buffer.

Note: Use this command before working 

on another call schedule profile.

wan callsch index <set#>

Specifies the call scheduling profile number to work 
with.

Note: Use this command to specify the call 

schedule profile before using other 
wan callsch

 commands.

wan callsch name <set-name>

Sets the name of the previously-specified call 
schedule.

wan callsch oncedate <year> <month> 

<day>

Sets a single date on which the previously-specified 
call schedule should be in effect.

wan callsch save

Saves the configuration of the previously-specified 
call schedule.

Note: Changes to the configuration in the 

working buffer are not saved or 
used until you enter this command.

wan callsch startdate <year> <month> 

<day>

Sets the date on which the previously-specified call 
schedule starts.

wan callsch starttime <hour> 

<minute>

Sets the time of day at which the previously-
specified call schedule should become active.

wan callsch weeklyday 

<Monday|Tuesday|Wednesday|Thursday|

Friday|Satudray|Sunday> 

<0:inactive|1:active>

Sets the day(s) of the week on which the previously-
specified call schedule should be active.