ZyXEL Communications n/a User Manual

 Chapter 21 WAN Commands

DSL & IAD CLI Reference Guide

Use these commands to configure the ZyXEL Device’s TR-069 auto-configuration settings.

Table 67   wan tr069 Commands

wan tr069 acsUrl <url>

Specifies the URL of the TR-069 auto-configuration 
server.

wan tr069 active <0:no|1:yes>

Activates or deactivates remote management via 
TR-069 on the WAN.

wan tr069 debug <on|off>

Activates or deactivates TR-069 debugging.

wan tr069 display

Shows the current TR-069 configuration.

wan tr069 dump dbglog

Displays TR-069 logs.

wan tr069 dump notification

Shows the TR-069 notification parameter table.

wan tr069 dump parameters [name] 

[NextLevel] [flag]

Shows a list of TR-069 notification parameters.

wan tr069 gateway active 

<0:no|1:yes>

Enables or disables remote management through a 
NAT router.

wan tr069 gateway display

Shows the current TR-069 gateway status.

wan tr069 gateway notifylimit 

<seconds>

Sets the time interval at which the gateway notifies 
the ACS when a Device entry is added to or 
removed from the ManageableDevice table.
The gateway is a NAT router between the ZyXEL 
Device and the ACS.

wan tr069 informInterval <seconds>

Sets the frequency with which the ZyXEL Device 
sends information to the auto-configuration server.

wan tr069 informTime <yyyy>-<mm>-

<dd>T<hh>:<mm>:<ss>

Sets the date and time at which the ZyXEL Device 
sends information to the auto-configuration server.

wan tr069 load

Loads the TR-069 configuration.

wan tr069 password <password>

Sets the TR-069 password for authentication with 
the auto-configuration server.

wan tr069 periodicEnable 

<0:disable|1:enable>

Enables or disables the periodic sending of 
information to the auto-configuration server.

wan tr069 reqpassword <password>

Sets the TR-069 connection request password.
When the auto-configuration server makes a 
connection request to the ZyXEL Device, this 
password is used to authenticate the auto-
configuration server.

wan tr069 reqport <1001 ~ 65535>

Sets the port number of the TR-069 connection 
request.

wan tr069 requsername <username>

Sets the TR-069 connection request user name.
When the auto-configuration server makes a 
connection request to the ZyXEL Device, this user 
name is used to authenticate the auto-configuration 
server.

wan tr069 reset

Resets the TR-069 configuration to its factory 
defaults.

wan tr069 routeRN <0 ~ 7>

Sets the remote node through which the ZyXEL 
Device routes the TR-069 connection requests.