ZyXEL Communications n/a User Manual

DSL & IAD CLI Reference Guide

Use these commands to configure IEEE 802.1Q VLAN groups and IEEE 802.1P priority 
levels for the ports on the ZyXEL Device.

The following section lists the commands for this feature.     

Table 7   8021Q Command Summary

802.1Q load

Loads the IEEE 802.1Q settings for configuration.

802.1Q disp

Shows the current IEEE 802.1Q settings.

802.1Q clear

Resets the IEEE 802.1Q settings to the factory defaults.

802.1Q active <1:active|0:inactive>

Enables or disables the IEEE 802.1Q feature on the 
ZyXEL Device.

802.1Q mgtvid <1~4094>

Sets the ID number of the management VLAN group.

802.1Q setpvid <LAN|PVC|WLAN> <index> 

<1~4094>

Sets the port VLAN ID of the specified interface on the 
ZyXEL Device.

802.1Q set1p <LAN|PVC|WLAN> <index> <0~7>

Sets the IEEE 802.1P priority level of the specified 
interface on the ZyXEL Device.

802.1Q groupset <groupid> <vid> <LAN 

<index>|<PVC|WLAN> <index>> <u|t>

Sets a VLAN group.

u|t

: Sets the interface to tag or untag all outgoing traffic 

transmitted through this VLAN.

802.1Q setlanAttri LAN <index> <t|u>

Sets an Ethernet port to tag or untag all outgoing traffic 
transmitted.

802.1Q igmpsnp enable

Enables IGMP snooping.

802.1Q igmpsnp disable

Disables IGMP snooping.

802.1Q igmpsnp maxresptime <0~255>

Sets the maximum response time that can elapse before 
the ZyXEL Device removes an IGMP group membership 
entry.

802.1Q igmpsnp queryinterval <0~255>

Sets the IGMP snooping query interval (in seconds) at 
which the ZyXEL Device sends host-query messages.

802.1Q igmpsnp robust <0~255>

Sets the IGMP robust value.

802.1Q igmpsnp disp

Displays the IGMP table on the ZyXEL Device.

802.1Q save

Saves the IEEE 802.1Q settings.