ZyXEL Communications n/a User Manual
Chapter 5 Dial Backup Commands
DSL & IAD CLI Reference Guide
40
The following table describes the labels in this display.
This example displays details about the dial backup port’s signal.
The following table describes the labels in this display.
Table 12 aux rate aux0
LABEL
DESCRIPTION
No.
The entry in the rate statistics.
TX (byte)
Transmitted bypts.
Rx (byte)
Received bytes.
TX Rate
Transmission rate.
RX Rate
Reiceived rate
TX Queue
Number of packets waiting to be transmitte.
ras> aux signal aux0
DTR: ON DSR: ON RTS: ON CTS: ON DCD: OFF
Table 13 aux rate aux0
LABEL
DESCRIPTION
DTR
Data Terminal Ready: The signal the ZyXEL Device sends to the modem to
indicate the ZyXEL Device is ready to receive data.
indicate the ZyXEL Device is ready to receive data.
DSR
Data Set Ready: The signal the modem sends to the ZyXEL Device to indicate the
modem is ready to receive data.
modem is ready to receive data.
RTS
Request to Send: The signal the ZyXEL Device sends to the modem to have the
modem prepare to receive data.
modem prepare to receive data.
CTS
Clear to Send: The signal the modem sends to the ZyXEL Device to acknowledge
the ZyXEL Device and allow the ZyXEL Device to transmit data.
the ZyXEL Device and allow the ZyXEL Device to transmit data.
DCD
Data Carrier Detect: The signal the modem sends to the ZyXEL Device when the
modem has a connection with the remote device.
modem has a connection with the remote device.