ZyXEL Communications n/a User Manual
Chapter 13 IP Commands
DSL & IAD CLI Reference Guide
77
ip smtp
destmail [address]
Sets the destination mail address.
ip smtp
srcmail [address]
Sets the source mail address.
ip smtp sendmail
Sends a mail.
ip smtp addrlist
Lists the smtp server, destination and return addresses.
ip smtp addrreset
Resets the smtp server, destination and return addresses.
ip status
Displays IP statistics counters.
ip tcp status
Displays the TCP statistics counters.
ip telnet <host-address>
[port]
Creates a Telnet connection to the specified host.
ip tftp
support
Displays whether the ZyXEL Device supports TFTP.
ip tftp
stats
Displays TFTP statistics coutners.
ip traceroute <host> [ttl]
[wait] [queries]
Sends ICMP packets to trace the route of a remote host.
ttl
: Time to live in seconds (0-255).
wait
: Timeout in seconds (0-255).
queries
: The number of ICMP packets to use (1-5).
ip tredir active <on|off>
Enables or disables traffic redirect.
ip tredir checktime <period>
Sets the number of seconds (0-255) ZyXEL Device waits
between attempts to connect to the target.
between attempts to connect to the target.
ip tredir disp
Displays the traffic redirect configuration.
ip tredir failcount <count>
Sets the number of times that ZyXEL Device can ping the
target without a response before forwarding traffic to the
backup gateway.
target without a response before forwarding traffic to the
backup gateway.
ip tredir partner <ip-address>
Sets the traffic redirect backup gateway IP address.
ip tredir save
Saves traffic redirect configuration.
ip tredir target <ip-address>
Sets the IP address that ZyXEL Device uses to test WAN
accessibility.
accessibility.
ip tredir timeout <timeout>
Sets the maximum number of seconds (0-255) ZyXEL
Device waits for a response from the target.
Device waits for a response from the target.
ip udp status
Displays UDP status.
ip urlfilter customize
actionFlags act(1-7)<enable/
disable>
Sets and displays the action flags.
ip urlfilter
customize add
[string]
[trust|untrust|keyword]
Adds the trusted, untrusted, or a keyword block with the url
string for filtering.
string for filtering.
ip urlfilter
customize delete
[string]
[trust|untrust|keyword]
Deletes the trusted, untrusted, or a keyword block with the
url string for filtering.
url string for filtering.
ip urlfilter customize display
Displays settings for the URL filter.
ip urlfilter customize
logFlags type<1-3>
<enable|disable>
Sets and displays the logging flags.
type1
: for websites do not match either custom blocked or
custom forwarded websites.
type2
: for custom blocked websites.
type3
: for custom forwarded websites.
Table 30 IP Commands (continued)
COMMAND
DESCRIPTION