Barco 26-0405000-00 User Manual

Setting up the DSK

This procedure enables you to capture a still frame image and assign it as the “type” for the 
DSK.  Please note:

As a recommendation, capture still frames into “temporary” memory as a setup 
procedure.  

Once still frames are captured, during live production you can switch the DSK 
between the DVI input and a Still Frame.  

„

Use the following steps to assign a captured still frame as the DSK “type.”

1.  Ensure that BG/DSK input is properly set up as a DVI source.  This input is the 

source of the still frames which you will capture.  Refer to the “

” section on page 94 for setup details.

2.  In Chapter 6, refer to the “

” section on page 117 for 

instructions on capturing still frames.  Up to three frames can be captured into 
temporary memory: 

FG_1, FG_2 and FG_3.

3.  In the Layer Functions Section, press BG/DSK.  The button blinks and the BG/

DSK Input Setup Menu appears.  

4.  Scroll to the Mode line and select DSK. 

5.  Scroll to the Type line and select the desired still frame: FG_1, FG_2 or FG_3.

It is highly recommended that you save still frames into 
“permanent” flash memory as a setup procedure — as this is 
a very time-consuming step that locks the front panel of 
PresentationPRO-II.