Barco 26-0405000-00 User Manual

Working with Layers

With PresentationPRO-II, you can perform the following types of LOGO transitions:

Using the 

LOGO source, you can transition a captured still frame to Program at the highest 

priority layer — covering all effects underneath.  

„

Use the following steps to transition the 

LOGO to Program:  

1.  Ensure that you have preset the desired transition type and rate.  Refer to the 

"

" section on page 115 for details.

2.  Ensure that the desired still frames have been captured.  Refer to the “

“ section on page 117 for details.

3.  In the Layer Functions Section, press LOGO.  The button blinks and the LOGO 

Input Setup Menu appears.

4.  Scroll to the Type line and select FG_1, FG_2, FG_3 or Black. 

5.  In the Layer Functions Section, press TRANS.  The TRANS button lights during 

the interval, and at the conclusion of the transition, the 

Home Menu appears.

„

Use the following steps to clear the 

LOGO from Program:  

1.  Ensure that you have preset the desired transition type and rate.  Refer to the 

"

" section on page 115 for details.

2.  In the Layer Functions Section, press TRANS.  The TRANS button lights during 

the interval, and at the conclusion of the transition, the 

Home Menu appears.  

This simple shortcut works because the 

LOGO is the only layer visible on 

Program, and thus the only element that can transition off.

In addition to its use as a full screen downstream graphic, the 
LOGO can also be used as a convenient “black preview” 
function.  When the 

LOGO source is set to Black, you can 

fade to black at any time, from any simple or complex setup, 
without affecting the underlying "look."

If desired, you can also clear the 

LOGO by pressing LOGO, 

CLEAR, TRANS.