Barco 26-0405000-00 User Manual

Capturing Still Frames

„

Use the following steps to save a captured still into permanent memory.  

1.  Capture a still as outlined in the previous two sections.  

"

"

" on page 118.  

2.  On the Frame Grab Menu, press {SAVE} to save the captured frame into the 

selected permanent storage register (

FG_1, FG_2 or FG_3).  Once pressed, the 

screen will display an important warning:

Figure 6-2.  Background Frame Save Warning

Press 

YES to save the frame.  All front panel controls will be locked for 

up to three minutes while the still frame is saved.

Press 

NO to cancel the procedure.

3.  If required, press {DELETE} to delete the selected frame from permanent storage.  

This button only appears when frames are stored in permanent memory.

Do not execute the next step during live production.  All 
controls will be locked during the "save" process.  It is 
recommended that you save stills during pre-production as a 
"setup" procedure.