Barco 26-0405000-00 User Manual
80
PresentationPRO-II • User’s Guide
4. Menu Orientation
Frame Grab Menu
cê~ãÉ=dê~Ä=jÉåì
The figure below illustrates a sample
Frame Grab Menu:
Figure 4-47. Frame Grab Menu (sample)
The
Frame Grab Menu enables you to capture still frames into the system’s three internal
frame stores. The “source” of the still frames is the system’s
BG/DSK input or the scaled
inputs.
Once captured, a still frame can be assigned as the input “type” for
BG, the DSK or the
LOGO source.
The three frame stores utilize PresentationPRO-II’s
“temp” (temporary) memory for on-air
production. During operation, you can overwrite the memory with new captured stills as
desired — as it takes only a few seconds to capture a still. Note that stills in “temp”
memory are lost when the system is powered down.
desired — as it takes only a few seconds to capture a still. Note that stills in “temp”
memory are lost when the system is powered down.
You can also store three stills in “permanent” flash memory, which will not be lost when the
system is powered down. At bootup, the contents of flash memory is read into “temp”
memory for use on-air. It takes several minutes to save a still into permanent memory, and
this procedure should not be performed on-air. Permanent frames can also be overwritten.
system is powered down. At bootup, the contents of flash memory is read into “temp”
memory for use on-air. It takes several minutes to save a still into permanent memory, and
this procedure should not be performed on-air. Permanent frames can also be overwritten.
H
O
O
M
E
N
A
V
A
V
A
D
D
J
DSK FRAME GRAB
FG to Capture
FG _1
[ 1280 x 1024 ]
Capture Format
CAPTURE
SAVE
Temp FG 1 Info:
[ FG1_T ]
File Name
Format
Perm FG 1 Info:
[ FG1_P ]
File Name
Format
DELETE
[ 1280 x 1024 ]
[ 1280 x 1024 ]
B
A
C
K
A
C
K
Note
The contents of a layer can also be captured. In Chapter 6,
refer to the “
refer to the “
” section on page 117 for
details.