Sanyo POA-PN03C User Manual

 

Click Power & Status on the main menu. The control page will be dis-
played.

By clicking ON or Standby button on the page, the power of the projector can be con-
trolled. 

  Power  ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down)

  Status .......................... Displays the status of the projector's power. (Refer to next page.)

  Power control ........ Controls the projector power by clicking the "ON" or "Standby" button.

  Inside temp.A  ........ Displays the surrounding temperature of  lamp in the projector. (Sensor A)

  Inside temp.B  ........Displays the surrounding temperature of panel in the projector. (Sensor B)

  External temp.  ......Displays the surrounding temperature of the intake vent. (Sensor C)

 

  ......... The warning icon will appear if the temperature exceeds a specified value. 

Check if there is no object to obstruct the airflow around the intake or exhaust 

vent. It might be airfilter clogged. Clean up the airfilter.

 

 

*  The temperature unit can be set either Centigrade or Fahrenheit in item "Initial 

setting". (+p.34)

Popup confirmation window

Confirmation window  

as shown in the below 

appears  when the 

 

button is pressed.