Sanyo POA-PN03C User Manual

✐

  The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode10 are stored into 

the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.

Click PC Adj. on the main menu. This function is to adjust the signal from 
the computer connected to the projector to obtain the proper picture 
image on the screen. 

Current mode ...... Displays a current mode like VGA, SVGA, XGA. SXGA, 

UXGA, WXGA, etc. or MODE1 - MODE10, EXT11 - 

EXT50 which are the customized mode created by 

using the "Mode Store" function described below. 

EXT51 - EXT60 represents mode Totalsave1 - 

Totalsave10 used in the item "Save" (+p.55).

Auto PC adj.......... Performs automatic adjustment.
Fine sync. .............. Performs Fine Sync adjustment.(0 ~ 31)
Total dots .............. Adjust the number of total dots in the horizontal 

period.

Clamp

 .........................Adjusts the phase of the clamp. (1 ~ 255)

Display area
 H orizontal ..........Adjusts the image area horizontally.
 Vertical ..............Adjusts the image area vertically.
Item 

Position
   Horizontal ....... Adjusts the horizontal position of the screen.
  Vertical ..............Adjusts the vertical position of the screen.
Reset......................... Resets the PC adjustments to the previous levels.
Mode Store .......... Stores the PC adjustment values. Select a mode 

no. [Mode1 - Mode10, ExMode11 - ExMode50] 

from the pull-down menu.

Mode Free ............ Clear the PC adjustment values. Select a mode 

no.  [Mode1 - Mode10, ExMode11 - ExMode50]  

from the pull-down menu.

  

Up to 60 characters can be used for 

the Memo of ExMode11 to ExMode50.