Sanyo POA-PN03C User Manual

Select input mode to "Network" previously.

  Access to the control page of the projector by using 

the  web  browser.  From  the  Network  menu,  click 

Capture tab to display the setting page (+ p.37).

  Select  the  computer  number  from  the  pull-down 

menu button of "Connecting PC" and click Start but-
ton. The screen image of the selected computer will 
appear on the projected screen in real time.
•  To stop capturing, click Stop button. The captured 

image of the computer on the screen is frozen.

•  To restart capturing, click Restart button.

 To end capturing, click End button. 

✐

  The IP address of the connecting PC should be registered previously (+ p.72).

✐

 If the error message appears, check item "Parameter set up"  (+ p.71).

✐

  You can use the capture function by using the web browser or the projector if the Network 

Capture 3 software is installed into the computer correctly and its icon stays on the task bar.

* PC provides the Network Capture.

Project a screen 
image of PC1 with 
PC2.

*  Start capturing of 

the PC1 from the 

PC5.

Set "On" when 

using the wireless 

mouse function