DELL D600 User Manual

Fill out the 

 as you complete these checks. 

 

 

Windows 2000 

1.

 

Click the Start button, point to Settings, and then click Control Panel.  

2.

 

Double-click the Add/Remove Programs icon.  

3.

 

Select the program that you want to remove.  

4.

 

Click Change or Remove Programs.  

5.

 

See the program documentation for installation instructions.  

 

 

The operating system cannot locate a sector on the floppy or hard drive. You may have a defective sector or corrupted 

FAT on the floppy disk or hard drive. Run the Windows error-checking utility to check the file structure on the floppy disk or hard drive. See 
Windows Help for instructions. If a large number of sectors are defective, back up the data (if possible), and then reformat the floppy disk or 
hard drive. 

 

 

The operating system cannot find a specific track on the floppy disk or hard drive. If the error is on the floppy disk, try another 

floppy disk. 

 

 

 

 

System configuration settings are corrupted. Connect your computer to an electrical outlet to charge the 

battery. If the problem persists, try to restore the data by entering the system setup program. Then immediately exit the program. See 
"

." If the message reappears, 

. 

 

 

The reserve battery that supports the system configuration settings may require recharging. Connect your 

. 

 

 

The time or date stored in the system setup program does not match the 

system clock. Correct the settings for the Date and Time options. See "

." 

 

 

 

 

The keyboard controller may be malfunctioning, or a memory module may be loose. Run the 

." 

 

 

Insert a disk into the drive and try again. 

 

 

The 

 or turn off the computer. 

 

If you are using a program that requires a higher resolution than your computer supports, it is recommended that you attach an external monitor 

to your computer.

 

 

If you are using a battery to power your computer, the battery charge may be depleted. Connect the computer to an 

electrical outlet using the AC adapter, and turn on the computer. 

 

 

Ensure that the electrical outlet is working by testing it with another device, such as a lamp. 

 

 

Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on. 

 

 

Bypass power protection devices, power strips, and the extension cable to verify 

that the computer turns on.