Nortel Networks P0886629 User Manual

P0886629 Issue 1.0

FAX Set Up and Operation Guide

•

Make copies of the pages in this chapter you will need for recording more 
program settings.

•

When a telephone is used for programming, a Norstar two-line telephone must 
be used.

This overview provides a recommended approach to FAX programming. To use 
this overview:

•

Start at the top and progress down through the programming options. Determine 
which options require your attention.

•

You will be programming Fax Mail on an installed Norstar Voice Mail system. 
Refer to the Norstar Voice Mail documentation for information on Norstar 
Voice Mail system operation. Refer to the Norstar Voice Mail Programming 
Record for specific information about what has already been programmed for 
Norstar Voice Mail.

•

Refer to the page number to find where that option is in this Programming 
Record. Space is provided for you to write the option or circle an option (if 
provided). The defaults are shown in bold text.

•

Instructions for accessing each programmable option are provided in brackets 
(“F” means “Feature”).

Note: To record the programming for the Dialing Translation Table, refer to 

the Norstar Voice Mail Programming Record.

.

Record a general description of your fax setup

Record dialing translation parameters for your system

Add Fax Mailboxes 
(F983, then press MBOX and follow prompts)

Configure Fax Mailboxes 
(F983, then press FAX and follow prompts)

Mailbox 
Configuration

page 56

Define Fax System Group Lists 
(F983, then press GLIST and follow prompts)