Nortel Networks P0886629 User Manual

  Appendix B: Dialing Translation

FAX Set Up and Operation Guide

P0886629 Issue 1.0

To load the Dialing Translation Table file onto the Norstar Voice Mail system you 
must shut down Norstar Voice Mail and then reboot the system using the DOS 
system disk you created. A Norstar two-line telephone is required to perform the 
following steps. 

To load the Dialing Translation Table file:

1. Press  

ƒ

 

·

 

⁄

 

fi.

2. Enter the default password  

¤¤¤‹‡‡¤  

(ACCESS2) and press  OK.

3. Press  NEXT.

4. Press  SHOW.

5. Press  GRACE.

6. Press  YES.

Note: The Norstar Voice Mail system issues a 

series of tones in descending pitch when the 
shutdown is complete. Wait for the tones 
before you unplug the NAM.

7. Unplug the AC power to the NAM.

8. Open the front cover of the NAM to access the 

floppy disk drive.

9. Insert the DOS system disk you copied the Dialing 

Translation Table file onto.

10. Plug in the NAM.

11. Wait until the light on the floppy disk drive goes out 

and then unplug the NAM and remove the DOS 
system disk.

12. Close the front cover of the NAM.

Password
                        RETRY

ACCESS Server
BACK      

    ADMIN

System shutdwn
BACK      NEXT       

Shutdown type
QUIT       NEXT     

Shutdown Graceful

                          NO