Sony P C G - R 6 0 0 H M P User Manual
Sony Notebook
User Guide
Getting help
98
About the docking station
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the
notebook
notebook
To switch on the i.LINK™ network switch, proceed as follows :
1
Disconnect your notebook from the docking station.
2
Disconnect the AC adapter and all cables from the docking station if necessary.
3
Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
pen tip.
4
Connect the docking station to your notebook.
5
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
✍
Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
Set the i.LINK™ network switch on the bottom of the docking station to the On position.
I cannot remove the disc inserted in the drive
You cannot remove discs when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
press the eject button.
When I disconnect the docking station, a warning message appears
Close all open applications and disconnect the peripheral devices, then disconnect the docking station by
following the procedure in Disconnecting your computer from the docking station
following the procedure in Disconnecting your computer from the docking station