Advantech ADAM-4550 User Manual

12

ADAM-4550 User's Manual

3.

Select the Upload menu.  A dialog box will
open.  Enter the file name where the firm-
ware to be uploaded is located.  Click the
OK button to begin uploading.  The green
LED light on ADAM-4550 now changes to a
steady glow.  When uploading is complet-
ed, the green LED will turn off.  Turn off your
ADAM-4550’s power and then turn the power
on again to complete the uploading process.
The ADAM-4550 unit is now ready to be
configured.  Follow procedures in section A
to re-configure the unit.

Start the ADAM Configuration and Diagnostic
Program.  Select the Diagnostics menu.  A di-
alog box will open.  Enter the selected ADAM-
4550 unit ID address and the communication
port baud rate.  Click the OK button.  The RF
link quality indicator will be displayed:

Total Received Packets indicates the total num-
ber of packets received by the selected ADAM-
4550 unit.

CRC Error indicates the number of received
packets with the CRC checking error.

Check Sum indicates the number of received
packets with the Check Sum error.

Transmit  acknowledged indicates the total
number of acknowledged packets received by
the selected ADAM-4550 unit from the remote
ADAM-4550 unit.

Transmit retransmitted indicates the total num-
ber of retransmitted packets sent out from the
selected ADAM-4550 unit due to poor link qual-
ity (i.e. no acknowledgment received).