Epson ActionNote User Manual

If the computer starts up but no image appears on the LCD

screen, follow these steps to solve the problem:

1. Use the brightness and contrast controls to adjust the screen

display.

2. To save power, you may have set a timeout period for the

system in the SETUP program. This turns off the screen

automatically after a specified period of time has elapsed

with no keyboard input. Press the spacebar to see if this

restores the display. (See Chapter 2 for information about

the Power Management options.)

3. The computer may just be in Suspend mode. Press the

spacebar to resume activity.

4. If you have connected an external monitor to your computer

and you are using it, you should not have any problem

displayin information on both screens at the same time.

Press

to toggle between simultaneous

display on both screens, the LCD only, or the monitor only.

5. If you are using the VGACONF utility, you may have selected

the CRT or Panel setting; check your VGACONF settings.

See Chapter 6 for details.