Epson ActionNote User Manual

6. If none of these solutions solves your software problem,

contact the software manufacturer for technical support.

You can solve most printer problems by following the

instructions in your printer manual. Be sure to check that the

printer has power and is correctly connected to the computer.

See Chapter 5 for instructions on connecting a printer. (The

printer manual also gives instructions on cable connections.)

If you have a parallel printer connected to the PRINTER port,

make sure the Parallel option in SETUP is set to Ext

printer.

If you have a serial printer or if you have problems feeding

paper, check the printer manual for the correct DIP switch

settings. If you are using MS-DOS, refer to your printer

documentation to see whether you need to use the MODE

command (described in the MS-DOS manual) to match the

serial settings.

If you inserted a PC card in the PC card slot and you cannot

access data on the card, follow these steps to solve the problem:

1. Make sure the card is the right type for your system. The

ActionNote accepts Type I and Type II cards that conform

to PCMCIA version 2.0.

2. Is the PC card inserted properly in the slot? Press the release

button to remove the card; then try inserting it again. (Most

cards have a label indicating which side goes up.) When the

card is inserted correctly, the PC card light goes on. See

Chapter 3 for instructions.