Epson ActionNote User Manual

The Suspend mode provides an efficient way to save battery

power. There are three ways to enter Suspend mode:

Close the computer cover.

Press     +                                       ( Press the spacebar to resume.)

Set the Power Management options in SETUP.

An easy way to enter Suspend mode is to close the computer’s

cover. The Suspend light on the computer comes on. When you

open the cover, the Suspend light goes out and you can resume

activity immediately.

You can also press                                       to enter Suspend mode and

temporarily stop system activity when you do not need to use

your computer for short periods of time. The Suspend light

lights up and the screen goes dark. The computer suspends

power to its components and devices but continues to supply

power to the RAM. (If you are not going to use the computer

for a longer time-20 minutes or so-turn it off.) To resume

activity, press the spacebar. The computer resumes normal

operation at the point at which you suspended it.

If you want to set regular suspend intervals, you can set the

Power Management timeout options in SETUP. When you

enable these options, the computer automatically enters

Suspend mode if you have not used it for the specified period

of time. When you are ready to resume activity, press the

spacebar.