Epson ActionNote User Manual

If the connector has retaining screws, tighten them by hand

or with a screwdriver.

Connect the other end of the cable to the printer. If the

printer interface has retaining clips, squeeze them gently

until they snap into place.

Connect the printer’s power cable to a grounded (earthed)

electrical socket.

Now run SETUP as described in Chapter 2 to set the

Parallel option to Ext printer.

You can use the 

1 port to connect serial devices such as a

serial printer or plotter. You could also connect a modem or

mouse.

Follow these steps to connect a serial device:

1.

Make sure both the computer and the serial device are off.