Canon 700 Series User Manual

TX (Send) Settings

Summar

y

 of Impor

tant Settings

1. ECM TX

ON*

OFF

Turns ECM (Error Correction Mode) for transmission ‘OFF’ and ‘ON’. 
This switch does not affect the settings for one-touch or coded speed 
dialing. (See “Using Speed Dialing,” on p. 2-32.)

All transmissions are sent in the ECM if the other party’s fax machine 
supports ECM.

ECM is turned ‘OFF’.

2. PAUSE TIME

From 01 to 15SEC; 02SEC*
Sets the length of the pause entered between numbers when you 
press [Redial/Pause]. (See “Adjusting the Length of a Pause,” on p. 
2-3.)

3. AUTO REDIAL

ON*

1. REDIAL TIMES

2. REDIAL INTERVAL

3. TX ERROR RESEND

ON*

ALL PAGES

ERROR & 1ST 
PAGE*

ERROR PAGE

OFF

OFF

Select whether to perform automatic redialing when the other line is 
busy or there is no answer. (See “Setting Up Redialing,” on p. 3-23.)

Customize the redial operation.

From 01 to 10 TIMES; 02TIMES*
Even if the machine is set to redial several times, it only redials once if 
there is no tone or ring back tone during the first attempt.

From 02 to 99 minutes; 02MIN.*

Selects whether to perform automatic redialing when a transmission 
error occurs.

Customize the redial operation.

The machine redials the number and resends all of the failed pages of 
the document.

The machine redials the number and resends the failed pages and 
the first page of the document.

The machine redials the number and resends the failed pages only.

The machine does not perform automatic redial when a transmission 
error occurs.

After the first attempt at dialing fails, redialing is not attempted.

4. ERASE FAILED TX

ON*

OFF

Select whether to delete the document of the failed transmission from 
memory.

The document of the failed transmission is deleted from memory. 

The document of the failed transmission remains in memory.