Toshiba PORTG R300 User Manual

 

This section describes how to determine if the computer’s SD card functions are functioning 
properly. Perform the steps below starting with Procedure 1 and continuing with the other 
procedures as required.Procedure 1:  Check on Windows XP 

Procedure 2:  Connector Check and Replacement Check 

Insert a SD card into the slot. Check if the installed Windows recognizes automatically the 
SD card and the data in the SD card can be read. 

If the card is not recognized or data are not red, go to Procedure 2. 

The SD card is connected to IS2101 on the System board . 

 

Check 1 

The SD card and system board may be disconnected. Make sure the SD card is 
firmly inserted to IS2101. If not, insert them firmly. If the SD card is still not 
functioning properly, perform Check 2. 

Check 2 

The SD card may be faulty. Replace it with a new one following the step in 
Chapter 4 Replacement Procedures. If the problem continues, perform Check 3. 

Check 3 

The system board may be faulty. Replace it with a new one following the step in 
Chapter 4 Replacement Procedures. 

 

 

2-60 

[CONFIDENTIAL] 

PORTEGE R300 Maintenance Manual (960-591)