Toshiba PORTG R300 User Manual

To execute this program, press 2, or select (2) Repair Initial config set and press Enter in 
the startup menu, press Enter and follow the directions on the screen. The H/W initial 
information setting tool consists of four subtests. Move the highlight bar to the subtest you 
want to execute and press Enter.  

Subtest 01  

Initial configuration 

 

 

 

 

This subtest executes the following items and shows their contents in the 
display. When an item ends normally, the program proceeds automatically to 
the next one. When an error is found, the program stops and waits for key 
input. (After solving the problem, the program executes the item again.) 

•  Setting of the CPU set table 
•  Setting of the micro code 
•  Setting of the EHSS 
•  Inputting and writing of DMI information 

 

 

 

 

When the DMI information is displayed,  the following messages appear in 
order. Input each information. (If you do not replace the PCB, the DMI 
information should not be changed.) 

1.  “Enter Model Name ?” is displayed. Input the computer’s model 

name and press Enter. (e.g. DynaBook) 

2.  “Enter Version Number ?” is displayed. Input the computer’s 

version number and press Enter. 
 (e.g. PC18070C313S) 

3.  “Enter Serial Number ?” is displayed. Input the computer’s serial 

number and press Enter. (e.g. 12345678) 

4.  “Enter Model Number ?” is displayed. Input the computer’s sales 

model number and press Enter. (e.g. PP200-AAAAA) 

5.  “Enter Bundle Number ?” is displayed. Input the computer’s 

PCN/Bundle number and press Enter.  
(e.g. PMSREQ3Q34H/S0123456789) 

6.  “Write data OK (Y/N) ?” is displayed. To write the DMI 

information to the Flash ROM, press Y, and then Enter.