Toshiba PORTG R300 User Manual

3 Tests and Diagnostics

3-90

[CONFIDENTIAL]

PORTEGE R300 Maintenance Manual (960-591)

3.29.3.2 Audio CD

Insert an audio CD and the following menu appears in the display.

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C] ; key stop

SUB-TEST : XX
PASS COUNT : XXXXX

ERROR COUNT: XXXXX

WRITE DATA : XX

READ DATA : XX

ADDRESS : XXXXXX

STATUS : XXX

CD Sound track number (01-98 : Track) ?

Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length = XXXXXXXX]]

Final : Block address = XXXXXXXXX

Select the track number you want to test and press Enter twice.

The following message appears in the display and selected track is played.

Play start CD sound !
Press any key <play stop>

After pressing any key, the music stops and the display returns to the selection menu of the
track number.

NOTE:

When the CD-ROM test is executed, [ALL DEVICE] must be selected in the
“Device Config.=” of the BIOS SETUP. If the “ALL DEVICE” is not selected,
music can not be played.

3.29.4 CD Sound (Legacy) test

To execute the CD Sound (Legacy) test, select 4 and press Enter.

CAUTION: Sound (Legacy) test is not supported in this model.